HERMES-G Series M.2 (2242) SATA III SLC SSD is compatible with SATA 1.0a, 2.6 and SATA 3.0 specification, it increases the transfer speed by adapting to SATA III framework to as high as 307.1 MB/sec of sequential read and 133.5 MB/ sec of sequential write speed (dual channel). Its physical specifications are 22 mm in width and 42 mm in length, connector is dual B + M Key with total of 59 pins gold fingers. HERMES-G Series M.2 (2242) SATA III SLC SSD further provides mean time between failures (MTBF) in excess of 3 million hours, and endurance performance greater than 2 million cycles with strong ECC of 40 bits per 1024 bytes block.

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) function is available for HERMES-G Series M.2 (2242) SATA III SLC SSD to detect and anticipate any failures in real-time monitoring in order to prevent possible errors which may occur during operation. It is also compliant to RoHS/REACH regulation which guarantees M.2 (2242) SATA III SLC SSD to be environmental friendly with toxic free materials.

With a decade of hard working in industrial flash market, PSI and APRO strive to provide abundant product lines, detailed quality inspection, long-term supply policy and attentive customer services. It is our main goal to treat our customers as our partners and provide them with reliable and trustworthy services and supplies. 

•  SLC-NAND type flash memory technology 

•  Bootable for O.S. installation 

•  Dual B+M key . 

• SATA 1.0a, SATA 2.6 and SATA 3.0 specification compliance

• SMART (Self-Monitoring, Analysis and Reporting Technology) function supported. 

• Non-volatile memory and no moving parts 

• SLC Flash SSD with capacities from 4GB up to 32GB 

• Sequential read performance up to 307.1 MB/sec 

• Sequential vwite performance up to 133.5 MB/sec 

• Automatic 40 bits per 1024 bytes error conection (ECC) and retry capabilities 

• +5V +/-  5% operation 

• Shock: 0.5ms, 1500 G, 3 axes 

• Vibration:7 Hz to 2K Hz, 20G, 3 axes 

• Very high performance, very low power consumption 

• Light weight and noiseless 

• Standard grade supports operating temperature 0'C to +70'C, and Industrial Grade, -40'C to +85'C.
  

For Product Spec-Sheet: Please click here.

For Product Data-Sheet: Please click here.