1. Supports USB 3.0 and USB mass storage
2. Compatible with USB 2.0
3. Supports Type I/II ATA flash PCMCIA cards.
(Please be noted that the reader does not support any I/O card, Linear Flash
card, or SRAM card)
4. Supports 3.3 V /5V ATA flash card
5. Supports SD/ SDHC / SDXC card up to spec
3.0; capacity up to 2TB
6. Native driver supported by Windows
10/8/7/VISTA/XP/2000/ME, Mac OS 9.x or above, Linux Kernal 2.4.2 or above,
Chrome OS, and any other OS which supports USB 2.0 mass storage device class.
3.3 V/5 V ATA interface switch settings:
The ATA card interface pf the reader
supports 3.3 V or 5 V, which is determined by the switch on the rear panel. The
default setting is 3.3 V; if the ATA card can not be identified with 3.3 V
interface, please switch to 5 V and try again. Please be noted that the USB
connection should be removed before adjusting the switch.
1. Card reader X 1
2. USB 3.0 cable X 1
1. Power on the PC and entering OS.
2. Connect the reader to the USB 3.0/2.0
port of PC with the USB cable.
3. OS will automatically identify the
device and install proper driver.
4. Installation completes; insert the flash
card into the reader and the data within can be accessed.
Please check price here.
SUPPORT. Tech support
from manufacturer and PSI. For tech support
and/or RMA, please go to http://www.psism.com/support.htm.
ORDER OR INQUIRE. Please
to place an online order or send e-mail inquiry to email@example.com
or call (301) 572-2168. We accept Visa, MasterCard, Discover and American
Express as well as government and university POs. International orders
may be conditionally accepted. Please click here
to order or view our ordering information page.
Products | PCMCIA Cards /
| Industrial /
Rugged Memory Products | SRAM
Flash Drives | Industrial
Cards | Embedded Memory
Copyrightę 1995 ~ 2016
PSISM, LLC , dba PSI (formerly Primary Simulation,
2963 Mozart Drive, Silver Spring, MD 20904 U.S.A.
Tel:(301) 572-2168, Fax: (301) 847-0739
10:00AM ~ 6:00PM U.S. Eastern Time